Automatic Oil Press Machine Temperature Control Expeller Presser Extractor 750W

Description

WELCOME TO OUR STORE
Villdomall
Your Best Online Business Partner
Automatic Oil Press Machine Temperature Control Expeller Presser Extractor 750W
WELCOME TO OUR STORE
Instruction for Careful Use
Step 1:
Install the press chamber, press rod and hopper
Step 2:
plug in the power, and the fan will operate automatically, but the preheating and pressing will not start. When the master switch is turned on, the fan and preheating will start simultaneously
Step 3:
Open the red button to preheat the press chamber (do not feed inside the hopper during preheating, and preheat the empty machine;
Do not install slag guide elbow during preheating;
Hot keys should be kept open during pressing.)
Step 4:
Start the press
★
When starting the press, start the press rod to rotate first, and then put the raw materials.
Do not fill the hopper at one time, should first put a small amount of raw materials to try to press, lubricate the press chamber press rod, do not fill the hopper at one time.
★
After observing that the oil slag is normal, start to put in a large number of raw materials
Step 5:
Clean the machine after the press is finished
★
Turn off the heating switch (red switch)
★
Turn on the switch downward, and the machine can be cleaned in reverse for 30 seconds (black switch)
★
Remove the hopper, lift the front cover and cool for a few minutes
★
Put on heat insulation gloves, remove the press bar from the chamber, and clean with clean water
Note
All machines support cold pressing and hot pressing mode, but many customers misunderstand that cold pressing mode does not require preheating. This is incorrect.
The cold pressing of our oil press refers to raw pressing of the material, and the hot pressing refers to the heated pressing of the material. Whether cold pressing or hot pressing, the chamber of the machine pressing must be heated to 180°-240° to ensure smooth oil output.
About the temperature setting
Normal temperature 200° : suitable for pressing most raw materials, such as rapeseed, black sesame, soybean, etc
High temperature 230-240° : suitable for pressing peanuts, sunflower seeds with shells, camellia seeds, cooked sesame;
Low temperature 160-180° : suitable for pressing walnut kernel, almond, flaxseed and other health oil;
Several factors affecting the temperature of the pressing chamber:
★
The heating block does not fit with the pressing chamber: before preheating, the front cover is laid down to check whether the heating block fits with the pressing chamber completely. If the fitting is not tight, the pressing chamber will not be heated, leading to the pressing problem;
★
Installation of slag guide tube: too much installation of slag guide tube will jack up the heating block, resulting in the separation of the heating block and the press chamber, so that the press chamber can not be heated;
★
long pressing time, heating can not keep up with the pressure chamber temperature drop, showing a sudden slag spraying phenomenon, then you can press the reverse key for about 30 seconds, let the temperature of the chamber rise, and then start pressing (can not directly stop and run again, when the machine stops the oil in the chamber will be baked, resulting in blockage)
Special Events
★
The newly squeezed oil contains protein, which is not suitable for direct stir-frying. It needs to be naturally left standing for more than 24 hours to clarify.
★
the press speed will be different due to the size of the material particles, generally the larger the particle feeding speed is slower;
As for the oil yield, the data we provide is laboratory data. The actual oil yield will vary due to different material quality, different producing area and different degree of dryness. It is not completely determined by the machine.
If you want a high oil yield, you need to buy professional raw materials for oil extraction (we use our own peanut experiment, using 3Kg peanut, 1.25kg oil extraction, oil extraction rate up to 41%)
Item Specifics
UPC
Does not apply
Power Type
Electric
Brand
Villdomall
Model
Oil press
MPN
167457-TT
Material
Stainless Steel 304
Bundle Description
Safe
Country/Region of Manufacture
China
Color
Silver
Product Type
Temperature control
Payment
We accept PAYPAL payment only.
your order will be shipped out when your transaction status is clear.
Please do make sure your address is correct. We only ship to confirmed address.
Shipping
Please make sure your shipping address is correct before we sending your package out. Once your payment is completed, please inform us by Email or leave eBay note if the changes are needed before we send the product.
All items will be shipped via USPS, UPS or FedEx from our US warehouse.
Returns
We accept returns , please feel free to contact us immediately if you change your mind and need to cancel the order.
When you received your package, please check it was damaged during transit or not. If damaged please contact us, we will do our best to solve it for you in time. Please do not return or post items before obtaining instructions from us.
We ONLY accept returns with original package. Please make sure that product has NO man-made sabotage. We will require a clearly picture for the damaged part for verification. Used items will not be accepted for return.
Contact Us
If there any problem,please do not hesitate to contact us. We will try my best to solve it.
Our tenet is customer satisfaction. If you are dissatisfied for any problem,please inform us before you leave negative feedback. Thanks for your understanding and trust in our store.
Villdomall
Your Best Online Business Partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Hot Item
New List Item
Durable 2channel Cable Protector Ramp Protect Cables from being Crushed by Cars
USD 47.99
110V Hot Stamping Machine 330W Embossing Machine For Leather Plastic Ebonite
USD 134.99
Tensile Cable Protector Ramp,Compression Resistance and Impact Resistance
USD 45.99
Graduated Horizontal Tripod, 6.3in Adjustable Height, Pointed Design
USD 52.00
Automatic Sliding Gate Opener Driveway Security Kit Sliding Gate Motor 1400lbs
USD 189.98
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
Automatic Oil Press Machine Temperature Control Expeller Presser Extractor 750W
WELCOME TO OUR STORE
Instruction for Careful Use
Step 1:
Install the press chamber, press rod and hopper
Step 2:
plug in the power, and the fan will operate automatically, but the preheating and pressing will not start. When the master switch is turned on, the fan and preheating will start simultaneously
Step 3:
Open the red button to preheat the press chamber (do not feed inside the hopper during preheating, and preheat the empty machine;
Do not install slag guide elbow during preheating;
Hot keys should be kept open during pressing.)
Step 4:
Start the press
★
When starting the press, start the press rod to rotate first, and then put the raw materials.
Do not fill the hopper at one time, should first put a small amount of raw materials to try to press, lubricate the press chamber press rod, do not fill the hopper at one time.
★
After observing that the oil slag is normal, start to put in a large number of raw materials
Step 5:
Clean the machine after the press is finished
★
Turn off the heating switch (red switch)
★
Turn on the switch downward, and the machine can be cleaned in reverse for 30 seconds (black switch)
★
Remove the hopper, lift the front cover and cool for a few minutes
★
Put on heat insulation gloves, remove the press bar from the chamber, and clean with clean water
Note
All machines support cold pressing and hot pressing mode, but many customers misunderstand that cold pressing mode does not require preheating. This is incorrect.
The cold pressing of our oil press refers to raw pressing of the material, and the hot pressing refers to the heated pressing of the material. Whether cold pressing or hot pressing, the chamber of the machine pressing must be heated to 180°-240° to ensure smooth oil output.
About the temperature setting
Normal temperature 200° : suitable for pressing most raw materials, such as rapeseed, black sesame, soybean, etc
High temperature 230-240° : suitable for pressing peanuts, sunflower seeds with shells, camellia seeds, cooked sesame;
Low temperature 160-180° : suitable for pressing walnut kernel, almond, flaxseed and other health oil;
Several factors affecting the temperature of the pressing chamber:
★
The heating block does not fit with the pressing chamber: before preheating, the front cover is laid down to check whether the heating block fits with the pressing chamber completely. If the fitting is not tight, the pressing chamber will not be heated, leading to the pressing problem;
★
Installation of slag guide tube: too much installation of slag guide tube will jack up the heating block, resulting in the separation of the heating block and the press chamber, so that the press chamber can not be heated;
★
long pressing time, heating can not keep up with the pressure chamber temperature drop, showing a sudden slag spraying phenomenon, then you can press the reverse key for about 30 seconds, let the temperature of the chamber rise, and then start pressing (can not directly stop and run again, when the machine stops the oil in the chamber will be baked, resulting in blockage)
Special Events
★
The newly squeezed oil contains protein, which is not suitable for direct stir-frying. It needs to be naturally left standing for more than 24 hours to clarify.
★
the press speed will be different due to the size of the material particles, generally the larger the particle feeding speed is slower;
As for the oil yield, the data we provide is laboratory data. The actual oil yield will vary due to different material quality, different producing area and different degree of dryness. It is not completely determined by the machine.
If you want a high oil yield, you need to buy professional raw materials for oil extraction (we use our own peanut experiment, using 3Kg peanut, 1.25kg oil extraction, oil extraction rate up to 41%)
Item Specifics
Power Type :
Electric
Brand :
Villdomall
Model :
Oil press
MPN :
167457-TT
Material :
Stainless Steel 304
Bundle Description :
Safe
Country/Region of Manufacture :
China
Color :
Silver
Product Type :
Temperature control
Payment
We accept PAYPAL payment only.
your order will be shipped out when your transaction status is clear.
Please do make sure your address is correct. We only ship to confirmed address.
Shipping
Please make sure your shipping address is correct before we sending your package out. Once your payment is completed, please inform us by Email or leave eBay note if the changes are needed before we send the product.
All items will be shipped via USPS, UPS or FedEx from our US warehouse.
Returns
We accept returns , please feel free to contact us immediately if you change your mind and need to cancel the order.
When you received your package, please check it was damaged during transit or not. If damaged please contact us, we will do our best to solve it for you in time. Please do not return or post items before obtaining instructions from us.
We ONLY accept returns with original package. Please make sure that product has NO man-made sabotage. We will require a clearly picture for the damaged part for verification. Used items will not be accepted for return.
Contact Us
If there any problem,please do not hesitate to contact us. We will try my best to solve it.
Our tenet is customer satisfaction. If you are dissatisfied for any problem,please inform us before you leave negative feedback. Thanks for your understanding and trust in our store.
All rights reserved.